Woodworking

We offer a comprehensive range of industry leading Adhesives for Joinery, Workshop assembly and onsite fit-out’s coupled with a wide range of benchtop and hand held dispensing systems.

Woodworking Adhesives

ECT Adhesives, in conjunction with our global manufacturing partners, offer a complete range of Adhesives and Sealant Chemistries, supporting manufacturing experts in all aspects of furniture production, woodworking and joinery. We focus on providing cost-effective solutions through quality off-the-shelf and bespoke products while offering the best in service, delivery and support.

Our goal is to give our customers the best bonding results by supporting them in every aspect of their bonding process.

Click your chosen area of interest to learn how our extensive range of high quality wood adhesives can assist you in any of following applications:

1. Edgebanding Adhesives

In modern, high-quality furniture manufacturing, the quality of the edgebanding is increasingly becoming a key criterion for evaluating the quality of the entire furniture item.

The end customer demands a glueline that is hardly visible and perfect. ECT Adhesives are the authorised Irish distributor for Jowat Adhesives, a global manufacturer and supplier of hot melt adhesives.

We are also the Irish Distributor for the full range of RIEPE Edgebanding solutions which are specially developed for the RIEPE® spraying systems which come fitted as standard on almost all modern Edgebanding Machines. By using the correct RIEPE® products you can be assured of getting the best possible results on your glue line.

Click your chosen area of interest to learn how our extensive range of industry leading products can assist you in the following applications.

Selection of Edgebanding Adhesives Products

Cleaner for flushing out applicator units for PUR hotmelts.

Unfilled EVA hotmelt adhesive designed for slow to medium speed automatic edgebanding machines.

EVA hotmelt suitable for use on BAZ-type machines and slower feed speed machines.

2. Post Forming

Laminate countertops and panels are available in a number of shapes and edge treatments. The most common is called “post-formed,” which means that the top is formed from a single piece of laminate that’s shaped into a backsplash at the rear and a rounded edge in front. Since it’s a single piece, it has no seams to separate and no corners to catch dirt.

Traditionally this process has been done by solvent based contact adhesives but people are also now moving to laminate these substrates with PVAc dispersions and also PUR hot melts which are more environmentally friendly options and offer better temperature resistance.

The border between the edge and the coating on the underside can also be sealed with a PUR hot melt adhesive to improve the moisture resistance of the product.

Click your chosen area of interest to learn how our extensive range of industry leading products can assist you in the following applications.

3. Doweling Adhesives

Doweling glues from the Jowacoll® product series are special PVAc dispersion adhesives for hardwood, softwood and wood-based substrates and are ideal for nozzle application on fully automated industrial units due to the optimised cut-off. The dispersions have been developed to meet the specific requirements of modern industrial units – from low-viscosity, process-optimised adhesives for horizontal application on automatic dowelling units, to pasty versions for vertical overhead application on assembly lines. The adhesive forms a tough-elastic glue film. Special additives in the formulation prevent material build-up at the nozzle tips and facilitate an efficient, accurate application in fast industrial processes.

Click your chosen area of interest to learn how our extensive range of industry leading products can assist you in the following applications.

Selection of Doweling Adhesives Products

4. Veneering And Lamination Adhesives

In the manufacture of modern furniture and Fire Doors, wood-based panels are surface-laminated with the most diverse materials. Frequently used materials are resinated decor foils, natural wood veneers, as well as thermoplastic foils, CPL and HPL. The finished panels have numerous different applications: from the kitchen and home furniture to general interior fittings and floorings, the shipbuilding and caravan industries, as well as for exhibition displays and shopfitting. Veneering is simply a method for decorating the surface of one material with another more attractive material.

As well as supplying a complete range of adhesives for the Veneering and Lamination sector, ECT Adhesives also provide a range of hand held and bench top dispense systems to assist with the process.

Click your chosen area of interest to learn how our extensive range of industry leading products can assist you in the following applications.

Selection of Veneering And Lamination Adhesives Products

Thermosetting UF resin for flat lamination and Veneering

Tuskbond XPRO - 500ml Aerosol Contact adhesive with latest solvent technology for minimal toxicity.

High solids sprayable contact adhesive suited for bonding curved surfaces

High viscosity Veneering PVAC with IMO approval

1205 Resin with 2545 hardener gives long open time

1205 Resin with 2584 hardener gives medium open time

1205 Resin with 2580 hardener gives short open time

5. 3D Lamination Adhesives

In the manafacture of wrapped doors PUD – (Polyurethane Dispersion) are the best adhesive solution. The PUD is sprayed on the base/core substrate, left to dry, and a short time later reactivated with heat.

PUDs are used in either vacuum or membrane pressing. Vacuum pressing is done by heating the overlay and then creating bottom vacuum pressure to form the laminate material over the part. The heat and vacuum pressure create intimate contact between the part and laminate material that then activates the adhesive. Once the process is complete the part is trimmed and ready to process further.

ECT work in conjunction with Jowat to supply a number of products in this sector.

Click your chosen area of interest to learn how our extensive range of industry leading products can assist you in the following applications.

Selection of 3D Lamination Adhesives Products

6. Profile Wrapping Adhesives​

Wrapped profiles are today accepted as standard components in the manufacture of modern furniture and building interiors. Whether as furniture decor, baseboards or cornice rails, drawer frames, wall and ceiling panels, door frames and other profiles of any kind – profile wrapping on the most diverse base substrates is a hot topic today, and wrapping materials can be chosen from an almost endless variety of foils, papers or veneers.

Jowat offer a range of EVA, PO and PUR Hotmelts for this process.

ECT work in conjunction with Jowat to supply a number of products in this sector.

Click your chosen area of interest to learn how our extensive range of industry leading products can assist you in the following applications.

7. Workshop And On-Site Adhesives

We offer a wide range of ashesives for workshop assembly and for on-site fitout. These adhesives help the operator get the best bond everytime and help ensure the quickest possible cycle time for bonding components.

We offer a very wide range of products which sill be able to cover all your requirements.

ECT work in conjunction with Jowat to supply a number of products in this sector.

Click your chosen area of interest to learn how our extensive range of industry leading products can assist you in the following applications.

Selection of Workshop And On-Site Adhesives Products

The Tec 830 is a robust hot melt glue gun, suitable for a range of industrial and construction applications.

Moisture-curing, one-component polyurethane foam used in general gap filling with B1 Classification DIN 4102-1.

Solvent based polyurethane adhesives for shoe sole attachment.

Solvent based Polychloroprene adhesives for shoe sole attachment.

FA101 is a one part, neutral curing, low modulus, low odour silicone sealant for sealing around frames and glazing units.

Tuskbond XPRO - 500ml Aerosol Contact adhesive with latest solvent technology for minimal toxicity.

Tuskbond NC101 non-chlorinated contact adhesive with excellent grab, a long open time, providing a strong and permanent waterproof bond.

Sealant for floor joints in pedestrian walkways, warehouses, parking areas.

FA190 is a one part, neutral curing, low modulus, low odour FRAME & Facade silicone sealant.

Façade sealant for external & internal use according to DIN EN 15651-1, Class 20HM.

Specifically designed for bonding ABS and uPVC plastics

Specifically designed for cleaning and degreasing ABS and uPVC plastics

High solids sprayable contact adhesive suited for bonding curved surfaces

Excellent elasticity, Air Tightness & Acoustic properties Membrane.

High strength, tear resistant membrane providing an air-tight and weather-tight seal

Adhesive for repair of exerior caravan panells

A high tack spray adhesive suitable for Carpet Tiles.