Medical Device
We offer a wide range of industry leading Medical Device Adhesives, Curing Equipment, Dispensing systems and consumables in addition to our range of advanced Surface Treatment Equipment.
Medical Device Assembly Industry
ECT Adhesives, in conjunction with our global manufacturing partners, offer a complete range of Adhesives, Dispensing Equipment, Curing Equipment and Surface Treatment Equipment to support manufacturing experts in all aspects of the Medical Device Assembly Industry. We focus on providing industry leading and cost-effective solutions through quality off-the-shelf and bespoke products while also offering the best in service, delivery, and product support.
Our goal is to give our customers the best bonding results by supporting them in every aspect of their bonding process.
Click your chosen area of interest to learn how our extensive range of industry leading products can assist you in the following applications:
1. Medical Grade Adhesives
We offer a wide range of industry leading medical grade adhesives from Panacol. All our medical grade adhesives are formulated to meet the biocompatibility standards of USP Class VI and/or ISO 10993. Panacol develops and produces cutting-edge adhesives for medical applications within a wide range of chemistries, this allows us to give you the best bonding solution for your applications requirements.
Click your chosen area of interest to learn how our extensive range of high-quality products can assist you.
Selection of Medical Grade Adhesives Products
Light Cure Cyanoacrylate with a secondary Moisture cure for shadowed areas
Single part heat only cured medical grade epoxy adhesive with low viscosity
Single part heat only cured medical grade epoxy adhesive
Cyanoacrylate Adhesive for high temperature applications
Cyanoacrylate Adhesive in a Range of Viscosities can be uses with POP primer for difficult surfaces
Developed for surface treatment of polyolefins, PTFE and silicones prior to bonding with Permabond® Cyanoacrylate adhesives.
Light cured epoxy adhesive with high temperature resistance
Excellent adhesion to many plastics, Fluoresces bright orange
Light cured epoxy adhesive with secondary heat cure for shadowed areas.
Two-part chemically cured medical grade epoxy adhesive
High viscosity gap-filling medical grade Cyanoacrylate Adhesive
Low viscosity capillary flow medical grade Cyanoacrylate Adhesive
Medium viscosity Medical grade Cyanoacrylate Adhesive
Light cured epoxy adhesive with no requirement for a secondary cure mechanism
Excellent adhesion to many plastics. Available in various viscosities.
Light-curing adhesive with high adhesion to both plastic and metal substrates.
Very flexible, very low viscosity medical grade adhesive with low shore hardness. Excellent adhesion to rubber and elastomers
Semi flexible medical-grade adhesive, excellent adhesion to glass and plastics, specially formulated to bond hose connections or housings.
UV-curing and thermally post-curing (dual-cure) medical grade adhesive ideal for use when you have shadowed areas.
Electrically and thermally conductive medical-grade adhesive
Excellent adhesion to difficult-to-bond plastics.
2. Dispensing Equipment
We offer a wide range of dispensing products and services from Fisnar. Our dispensing products offer turn-key solutions for dispensing liquids and paste.
As a total solution fluid dispensing manufacturer, Fisnar offer everything from simple hand or bench dispensers to highly advanced automatic robotic dispensing systems.
Click your chosen area of interest to learn how our extensive range of high-quality products can assist you.
Selection of Dispensing Equipment Products
Permabond P-Nozzle for accurate dispensing of cyanoacrylate adhesive.
Manual dual cartridge dispenser for 1:1 and 2:1 50 ml cartridges
Dispensing Component Kit that includes a selection of popular tip types and sizes of QuantX™ caps, pistons and syringe barrels
Syringe Barrel Adapter Assemblies.
Temperature control jacket for ST series pressure vessels
Cartridge Retainer 20oz ( 600 ml )
General purpose dispense controller
Clear Reservoirs in different sizes
Standard Reservoirs in different sizes
Light and portable Reservoirs in different sizes
Piston pressure tanks.
Syring mixer all types of syringe fluids
Diaphragm valve designed for precise flow control of low to medium viscosity materials.
Progressive cavity valve which offers true volumetric dispensing.
Progressive cavity valve which offers true volumetric dispensing of two part materials.
Valve controller for all Fisnar I-Series and V-series progressive cavity valves.
Controller for Fisnar Pz1200 Piezo Electric Jet/Contact Dispense Valve.
Progressive cavity valve which offers true volumetric dispensing.
Pneumatically controlled dispense tool for dispensing two-part materials packaged into 50ml cartridges
Pressure retainer for plastic and metal cartridges (300/310ml).
QuantX™ syringe barrels, plungers, and end caps
The SVC100 is a fully integrated spray valve controller
Spray valve provides close tolerance spraying of fluids of up to 1000cps.
No-clog spray valve for low-viscosity materials,
Manual dual cartridge dispenser range
The F1300N rotary table provides an efficient method of dispensing a circular pattern
Pinch Tube Dispensing Valve ideal for 2-part epoxies and cyanoacrylates
Range of Reservoirs in different sizes
The JD927 Volumetric Hand Dispenser is lightweight and comfortable
Manual hand dispenser for low viscosity liquids such as solvents and cyanoacrylates.
PP300 see-through chamber for dispensing low viscosity liquids.
Fisnar PTFE-Lined Dispensing Tips are stainless steel cannula with a PTFE insert lining that projects approximately 1/8” (3.18mm) from the cannula.
A versatile precision dispenser with very high reliability
A versatile precision dispenser designed with I/O circuit for integrated automation
Peristaltic pump dispensers transfer low-viscosity liquids by pressure displacement.
Diaphragm valve designed for precise flow control of low to medium viscosity materials.
Micro Shot Dispensing Valves designed for precision dispensing
The F4200N.2 is a compact and ergonomically designed benchtop robot
Fisnar QuantX Flexible Dispense Tips
3. Curing Equipment
We offer the full range of light curing equipment from Dr. Hönle AG, one of the world’s leading manufacturers of industrial UV and Light curing technologies. Their strength lies in their ability to customise product solutions to suit the specific requirements of our customers.
We offer solutions including LED curing spot lamps systems, traditional bulb curing spot lamp systems, LED flood lamp systems, LED flood lamp conveyorised systems and Radiometers.
Click your chosen area of interest to learn how our extensive range of high quality products can assist you.
Selection of Curing Equipment Products
LED-UV curing chamber working area: 350 x 350 x 320 mm
High intensity hand-held LED curing and fluorescing lamp
High-performance UV spot source for precise curing of UV reactive adhesives and compounds.
High intensity LED Flood lamp
Compact LED-UV curing chamber.
Table-top LED curing conveyor system
Calibrated Radiometer for online testing
High powered UV LED curing system with up to 4 LED heads with extremely long service life.
High performance traditional metal halide bulb type UV spot source.
4. Surface Treatment Equipment
We offer Corona and Plasma treatment systems from 3 DT LLC. A lot of the plastics used in the medical industry have a low surface energy which makes wetting out the surface and bonding to them very difficult. With the help of 3DT LLC’s cutting edge Corona and Plasma treating systems we can get over these difficulties and help you to get the best possible bond.
Click your chosen area of interest to learn how our extensive range of high quality products can assist you.
Selection of Surface Treatment Equipment Products
Corona Treating System for treatment of medical tube ends
Corona treatment system
Atmospheric plasma treatment system.
5. Orthopedic Implant Masking
In the manufacture of orthopedic implants sometimes it is necessary to mask certain areas of the implant as it goes through the manufacturing process. This masking can be to protect an area whilst the rest of the part is being polished or some coatings are being applied. The very unique Vitralit mask range of light-curing masks from Panacol are designed to do just this.
These masks can be easily applied by brushing, dipping or spraying and then cured in seconds when exposed to high-intensity light. The cured mask can then be easily removed further on in the manufacturing process leaving no residue on the implants.
Click your chosen area of interest to learn how our extensive range of high quality products can assist you.
Selection of Orthopedic Implant Masking Products
Light-curable peelable masking material.
Light-curable masking material removable with warm water soak and peeling