Skip to content 
Riepe LPZ/11 Release Agent is sprayed onto the upper and lower edge area of the workpiece to help prevent the adhesion of emerging glue onto the workpiece.
Prevents the adhesion of emerging glue onto the workpiece.
Area of application: Prior to the pre-milling
Container (litre): 10, 30 L
Colour: Transparent
There are no questions yet. Be the first to ask a question about this product.
The fabric-sisal-lamellar wheels are brushes with a cast mounting core.
Area of application for LP 163/93: Before buffing wheels / surface scraper. Spray onto the...
Ensure the consistent high quality of your work-pieces by including the cleaning of the chain...
Riepe LP120/12 RELEASE AGENT Area of application for LP120/12: Pressure roller ( as an alternative...
LP289/99 is applied just after the pressure zone. It is sprayed onto the upper and...
NLFY may be applied to each of the following Areas: (a) Pressure roller; (b) Edgeband/...
The special plastic cleaners developed by RIEPE® are the first choice for the manual cleaning...
Single part heat only cured medical grade epoxy adhesive with low viscosity
Single part heat only cured medical grade epoxy adhesive
Low application temperature hotmelt adhesive
High performance hotmelt adhesive
Polyolefin good half way option between EVA and PUR adhesives
Cyanoacrylate Adhesive for high temperature applications
Cyanoacrylate Adhesive in a Range of Viscosities can be uses with POP primer for difficult surfaces
Low cost converter (fits in 320ml skeleton gun)
Single part heat only cured medical grade epoxy adhesive with low viscosity
Single part heat only cured medical grade epoxy adhesive
Low application temperature hotmelt adhesive
High performance hotmelt adhesive
Polyolefin good half way option between EVA and PUR adhesives
Cyanoacrylate Adhesive for high temperature applications
Cyanoacrylate Adhesive in a Range of Viscosities can be uses with POP primer for difficult surfaces
Low cost converter (fits in 320ml skeleton gun)
Reviews
There are no reviews yet.