...
Illbruck ME501 Duo Window Membrane HD
ME501-Duo-Window-Membrane-HD

Illbruck ME501 Duo Window Membrane HD

ME501 is a high strength, tear resistant membrane made from polyethylene co-polymer film with non-woven fabric. It can be applied before or after window installation to suit on-site details and programming. It is also available with gasket options for fixing to window profiles. The product meets the recommendations of the RAL Quality Assurance Association for windows and doors. Successfully tested by MPA Hannover to EN1026 (airtightness) & EN1027 (weathertightness). The membrane is attached to the window with SP525 adhesive, enhanced ‘acrylic adhesive +’ strip, or integral gasket and to the construction reveal material with SP525 adhesive. Self adhesive version (ME501VV) also available.

Purpose:

ME501 provides a high performance seal to the perimeter joint between the window/curtain wall and the construction reveal. Due to the intelligent, variable vapour permeability (sd value), when used in an internal UK (warm) environment, it will be vapour-tight, and when used in an external UK (cold) environment it will be vapour open. This means that the membrane is suitable for interior and exterior use providing an air-tight and weather-tight seal whilst always complying with inside tighter than outside principles.

Features:

  • Complies with principle of ‘inside tighter than outside’ in order to facilitate efficient vapour control;
  • BBA accredited alternative to EPDM in many applications;
  • Excellent drying potential (due to the membrane’s vapour permeability) avoiding mould growth and physical damage;
  • UV stable  – will tolerate up to 9 months direct exposure prior to covering;
  • Fully compatible with illbruck building protection membranes;
  • Weathertight against driving rain to 1200 Pa
  • ME501VV self adhesive version also available.

Technical Data Sheet ME501

Technical Data Sheet ME501 VV

ME508 and ME501 Duo Window Membranes BBA Certificate

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “Illbruck ME501 Duo Window Membrane HD”

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.

Supplementary Products

Supplementary Products

2-part toughened acrylic adhesive bonds well to unprepared aluminum

Light Cure Cyanoacrylate with a secondary Moisture cure for shadowed areas

Cyanoacrylate with excellent water resistance

FA101 is a one part, neutral curing, low modulus, low odour silicone sealant for sealing around frames and glazing units.

Thermosetting UF resin for flat lamination and Veneering

A very high-performance “self-healing” polyurethane resin system.

Supplementary Products

Related Products

2-part toughened acrylic adhesive bonds well to unprepared aluminum

Light Cure Cyanoacrylate with a secondary Moisture cure for shadowed areas

Cyanoacrylate with excellent water resistance

FA101 is a one part, neutral curing, low modulus, low odour silicone sealant for sealing around frames and glazing units.

Thermosetting UF resin for flat lamination and Veneering

Shopping Cart
Scroll to Top

Make an Inquiry