Need Help? Call +353 1 885 0000
  • NEWS & EVENTS

ECT Adhesives

  • HOME
  • ABOUT US
  • INDUSTRIES
    • Medical Device
      • Medical Grade Adhesives
        • UV And Visible Light Curing Adhesives
        • Cyanoacrylate Adhesives
        • Epoxy Adhesives
      • Dispensing Equipment
        • Hand Dispensers
        • Dispensing Consumables
        • Dispense Valves
        • Dispense Robots
        • Dispense Valve Controllers
        • Reservoirs
      • Honle UV and Visible light Curing Equipment
      • Surface Treatment Equipment
        • Plasma Treatment Systems
        • Corona Treatment Systems
      • Orthopaedic Implant Masking
    • Electronics
      • Potting And Encapsulating
        • Hard And Rugged Potting Compounds
        • Flexible Potting Compounds
        • Thermally Conductive Potting Compounds
        • Clear Encapsulants To Protect LEDs
        • Innovative non-hazardious Compounds
        • Hot Melt Potting Compounds
      • Conformal Coating
        • Acrylic Conformal Coating
        • Silicone Conformal Coating
        • Light Curing Conformal Coating
      • Thermally Conductive Adhesives
        • Single Part Heat Curing
        • Two Part Chemical Curing
        • RTV Curing
      • Electrically Conductive Adhesives
        • Single Part Heat Curing
        • Two Part Chemical Curing
      • Electronics Labels
    • Woodworking
      • Edgebanding Adhesives
        • EVA Edgebanding Adhesives
        • PUR Edgebanding Adhesives
        • Riepe Edgebanding Solutions
        • Edgebander Manafacturers Application Chart
      • Postforming Adhesives
      • Dowelling Adhesives
      • Veneering And Lamination Adhesives
        • UF/Thermosetting Adhesives
        • PVA Based Adhesives
        • Contact Adhesive
        • PUR Hotmelts Adhesives
      • 3D Lamination Adhesives
      • Profile Wrapping Adhesives
      • Workshop And On-Site Adhesives
        • Adhesives And Sealants
        • FLOORING Adhesives
        • Caulks And Fillers
        • Expanding Foams
    • Modular Building And Construction
      • SIP & Sandwich Panel Manufacture
      • Roofing
      • Flooring
      • Hygienic Cladding
      • Glass And Glazing
      • Air Tightness
      • Modular Building Internal Fitout
        • Adhesives And Sealants
        • Caulks And Fillers
        • Expanding Foams
        • Fire Stopping Products
    • Engineering and Ventilation
      • Ductwork And Ventillation
      • Thread Lockers, Retainers And Pipe Sealers
      • Plastic & Metal Bonding
    • Transportation
      • Vehicle Conversion And Caravan Repair
      • Marine
      • Aerospace
    • Sign And Display
      • Sign Installation Adhesives
      • Plastic & Metal Bonding
      • Clear Encapsulants To Protect LEDs
      • Clear Adhesives
    • Bedding And Upholstery
      • Mattress Manafacture And Assembly
      • Upholstery
    • Composite And Plastic Bonding
    • Packaging Adhesives
  • EQUIPMENT
    • Medical Device
      • Dispensing Equipment
        • Hand Dispensers
        • Dispensing Consumables
        • Dispense Valves
        • Dispense Valve Controllers
        • Dispense Robots
        • Reservoirs
      • UV and visible light Curing Equipment
      • Surface Treatment Equipment
        • Corona Treatment Systems
        • Plasma Treatment Systems
    • Electronics
      • Dispensing Equipment
        • Dispense Controllers
        • Dispense Valves
        • Dispense Robots
        • Reservoirs
        • Dispensing Consumables
      • Mix And Dispense Machines
      • ESD Safe Vacuum Pickup Systems
      • UV and visible light Curing Equipment
    • Industrial Dispensing Equipment
    • Hot Melt Guns
  • PARTNERS
    • AkzoNobel
    • Apollo
    • Araldite
    • Bondchem
    • CHT
    • Fisnar
    • Fluid Research
    • Dr. Hönle AG Group
    • J and S Adhesives
    • Jowat
    • Nullifire
    • Pafra
    • Panacol
    • Pizzi
    • Power Adhesives
    • Riepe
    • Robnor Resinlab
    • Siroflex
    • SR-Tek
    • Tremco Illbruck
    • Tuskbond
    • 3DT
  • MEDIA
    • Brochures
      • Electronics Industry Brochures
      • Medical Device Industry Brochures
      • Woodworking Brochures
        • Woodworking Industry Brochures
        • Edgebander Manafacturers Application Chart
      • Bedding And Upholstery Brochures
      • Packaging Brochures
      • Additional Brochures
    • Videos
      • Industry Videos
        • Medical Device Industry Videos
        • Electronics Industry Videos
        • Woodworking Industry Videos
        • Modular Building Industry Videos
        • Sign And Display Industry Videos
        • Bedding And Upholstery Industry Videos
        • Composite And Plastic Bonding Industry Videos
        • Packaging Industry Videos
    • Certification
    • Technical
    • Customer Forms
  • CONTACT
Adhesives Questionnaire
0
Saturday, 22 October 2022 / Published in Chemistry, Hot Melts

The world’s most advanced hot melt dispensing system Graco InvisiPac!

The Graco InvisiPac System is the newest and most comprehensive upgrade of hot melt technology for packaging in a generation.

When designing the Invisipac system Graco set out to fix all of the problems that people have with  existing systems.

  • Eliminate the dangers of working with hot melt tanks full of very hot adhesives.
  • Reducing adhesive usage.
  • Reducing maintenance downtime.
  • Reduce heating up time.
  • Reduce running costs.
Graco InvisiPac Hot Melt Tank

The Hot Melt Tank

InvisiPac is a tankless system, instead of a big, bulky tank, InvisiPac uses a vacuum to pull bulk hot melt pellets into a compact melting chamber in the center of the system. Which also holds less than a litre of glue – meaning that your adhesive gets up to temp in about 10 minutes. The system dispenses the glue through a heated hose and a state-of-the-art gun.  This environment is much more friendly to the glue, since there is a lot less exposure to harsh temperatures and the system only uses as much heat as is necessary to get the application flowing.

Click for full product details InvisiPac Hot Melt Tank

 

Graco InvisiPac Hot Melt Tank

The Vacuum System

The InvisiPac’s vacuum system reloads automatically – and is tucked away where a worker isn’t at risk of accidentally burning themselves when topping up the hot melt tank, thus they are protected from hot molten adhesive, tanks and hoses.

This system ensures you get a continuous supply of hot melt, so there is no longer any need to worry about starving the tank or losing adhesive. The vacuum system also eliminates thermal shocking which happens when the tank gets too low causing you to make a miscalculation. Also end up adding too much adhesive to it. The overall temperature drops, your flow slows dramatically and in some cases, you have to stop operations altogether just to get the glue back up to temp.

Graco InvisiPac Hot Melt Gun

The Gun

For the InvisiPac system Graco have  re-engineered the gun, tips, manifolds, modules and everything else that goes into dispensing glue. This new gun is the result of years of research and has a (patent-pending) free-flow channel for adhesive that drastically reduces dead spots and the resulting char buildup. They have  also added filters that run into the manifold to catch char as it builds. The result of all this innovation is an extremely robust glue gun which dramatically reduces maintenance downtime. Allows you to make a minimum of 30 % reduction in your adhesive usage.

Click for full product details InvisiPac Glue Gun

 

Graco InvisiPac LineSite Interface

The Interface

Graco InvisiPac has the most intuitive, simple-to-learn-and-use interface on the market. It has a single screen to view temperatures in all of your heat zones, incorporating icon-based graphics. Also implementing features that track adhesive consumption. Also making data about operations, errors and events easily transferable and downloadable.

Click for full product details InvisiPac LiteSite

 

Just reply to this email and we can discuss how ECT adhesives can help you.

ECT Adhesives – The Power to Imagine a better manufacturing future.

Tagged under: Graco InvisiPac

What you can read next

Fisnar Announces An Upgrade To Its F4200N.1 Desktop Robot
The new High Temperature Resistant Medical Grade Adhesive!
New epoxy adhesive for bonding magnets

Recent Posts

  • A-safe-future-for-polyurethane-products-image-ECT-Adhesives.jpg

    New training requirements for the safe use of polyurethane products containing diisocyanates

    New training requirements for the safe use of p...
  • Manufacturing Ireland 2022

    ECT Adhesive solutions will be exhibiting at Me...
  • Solutions for the Medical Device Manafacturing Industry

    Dear Customers, ECT Adhesives solutions are Ire...
  • Solutions for the Woodworking Industry

    Dear Customers, ECT Adhesives solutions are Ire...
  • Solutions for the Electronics Assembly Industry

    Dear Customers, ECT Adhesives solutions are Ire...

Recent Comments

    Archives

    • October 2022
    • April 2021
    • March 2021
    • February 2021
    • January 2021
    • December 2020
    • November 2020
    • October 2020
    • September 2020
    • August 2020
    • July 2020
    • June 2020
    • May 2020
    • February 2020
    • January 2020
    • November 2019
    • September 2019
    • May 2019
    • April 2016
    • March 2016

    Categories

    • Chemistry
    • Composites
    • Contact Adhesive
    • Cyanoacrylate
    • Design Competition
    • dispensing & automation equipment
    • Electronics
    • Engineering
    • Epoxy
    • Events
    • Furniture and Upholstery
    • Honle
    • Hot Melts
    • Industries
    • Medical device
    • Modular Building
    • News
    • Packaging
    • Polyurethane
    • Power Adhesives
    • Products
    • Signs and Display
    • Technology
    • Tuskbond
    • Uncategorized
    • Videos
    • Woodworking

    Meta

    • Log in
    • Entries feed
    • Comments feed
    • WordPress.org

    Recent Posts

    • A-safe-future-for-polyurethane-products-image-ECT-Adhesives.jpg

      New training requirements for the safe use of polyurethane products containing diisocyanates

      0 comments
    • Manufacturing Ireland 2022

      0 comments
    • Solutions for the Medical Device Manafacturing Industry

      0 comments
    • Solutions for the Woodworking Industry

      0 comments
    • Solutions for the Electronics Assembly Industry

      0 comments

    Featured Posts

    • A-safe-future-for-polyurethane-products-image-ECT-Adhesives.jpg

      New training requirements for the safe use of polyurethane products containing diisocyanates

      0 comments
    • Manufacturing Ireland 2022

      0 comments
    • Solutions for the Medical Device Manafacturing Industry

      0 comments
    • Solutions for the Woodworking Industry

      0 comments
    • Solutions for the Electronics Assembly Industry

      0 comments

    Full menu across top of page.

    • Home
    • About Us – Irelands Top Adhesives Supplier
    • Site-Map
    • Contact page

    Unable to load Tweets

    • LinkedIn
    • Twitter
    • Instagram
    • Facebook
    © 2020 ECT Adhesives | All rights reserved. Privacy Policy.
    Site by CMKC | Digital
    TOP