...
Fisnar CR 570 600ml (20 oz) Cartridge Retainer
FISNAR CR 570 600ML

Fisnar CR 570 600ml (20 oz) Cartridge Retainer

The CR 570 features an easy screw cap design, fitted with a quick-connect single shutoff connector, which ensures safe operation when replacing the “inserted” cartridge.

It’s aluminium construction also gives it long lasting use in the toughest of application environments.

It has also been specifically designed to be compatible with all 20oz (600ml) plastic cartridges (Techcon, Semco & Nordson EFD) currently available on the market.

Machined slots in the retainer body allow for the fluid level inside the “inserted” cartridge to be easily monitored. Alternatively a capacitive sensor can be installed onto the retainer, so as to act as a low level sensor.

The CR570 can be attached directly to a Fisnar dispense controller or used as part of a fluid feed system/reservoir.

Key Features

  • Compatible for use with Techcon, Semco, and EFD 20 oz cartridges
  • Machined slots in retainer body allow for the fluid level inside the “inserted” cartridge to be easily monitored
  • Optimized tube design reduces the cartridge expansion while decreasing the risk of air ingression into the fluid
  • Quick connect air-inlet connector allows for the safe removal of compressed air from the retainer when replacing the cartridge
  • Can be attached directly to a Fisnar dispense controller or used as a valve fluid feed system/reservoir

Product Data Sheet

Fisnar Engineered Dispensing Solutions Brochure

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “Fisnar CR 570 600ml (20 oz) Cartridge Retainer”

There are no questions yet. Be the first to ask a question about this product.

Send me a notification for each new answer.

Supplementary Products

Supplementary Products

5 out of 5 based on 1 customer rating
(1 customer review)

Riepe Antistatic Coolant for Acrylic Edges - Blue

2-part toughened acrylic adhesive bonds well to unprepared aluminum

Light Cure Cyanoacrylate with a secondary Moisture cure for shadowed areas

Cyanoacrylate with excellent water resistance

FA101 is a one part, neutral curing, low modulus, low odour silicone sealant for sealing around frames and glazing units.

Thermosetting UF resin for flat lamination and Veneering

Supplementary Products

Related Products

5 out of 5 based on 1 customer rating
(1 customer review)

Riepe Antistatic Coolant for Acrylic Edges - Blue

2-part toughened acrylic adhesive bonds well to unprepared aluminum

Light Cure Cyanoacrylate with a secondary Moisture cure for shadowed areas

Cyanoacrylate with excellent water resistance

FA101 is a one part, neutral curing, low modulus, low odour silicone sealant for sealing around frames and glazing units.

Shopping Cart
Scroll to Top

Make an Inquiry