0
/ Published in Chemistry, Contact Adhesive, Power Adhesives

Cyanolit® High Performance Medical Grade Cyanoacrylate Adhesive Range!

Cyanolit® adhesives are solvent-free, reactive adhesives which are formulated from esters derived from cyanacrylic acid.

Curing of cyanoacrylates occurs without heat, pressure. Also for other activators.

Typically, the one-component cyanoacrylate adhesives cure within seconds when in contact with atmospheric humidity. Also the moisture on the surfaces of the materials being bonded.

Cyanolit medical grade provide:

  • Instant bonding without solvents or light curing equipment
  • Certified to USP Class VI
  • Specific assembly without outgassing/blooming
  • Application specific bonding of porous materials and rubber
  • Application specific bonding of PP and other difficult plastics
  • Excellent adhesion to many substrates, especially plastics
  • Range of viscosities available, from capillary flow to thixotropic
Cyanolit 241F

 

Cyanolit® 241 F

 

One part adhesive based on cyanoacrylate with good bonding on a wide range of materials including plastics, metals and elastomers. 

It has a Low viscosity makes it ideal for applications where wicking of the adhesive in to pre-assembled parts is required. 

 
 

 
Cyanolit 732 F medical grade cyanoacrylate adhesive

 

Cyanolit® 732 F

One part adhesive based on cyanoacrylate with good bonding on a wide range of materials including plastics. Also including metals and elastomers.   

It has a medium viscosity which is especially suited for applications where wicking is undesirable or for bonding porous materials.

 
 

 
Cyanolite 203 TX medical grade cyanoacrylate adhesive image - ECT Adhesives

 

 Cyanolit® 203 TX

One part adhesive based on cyanoacrylate with good bonding on a wide range of materials including plastics. Including also metals and elastomers.

It is a high viscosity thixotropic material which is especially suited for applications requiring gap filling.

 
Fisnar Engineered Dispensing Solutions

 

Dispensing Cyanoacrylate adhesives 

Cyanoacrylate adhesives present some challenges when you want to dispense them successfully.

  • You need to prevent any moisture getting to the uncured adhesive. Otherwise this will cause it to cure prematurely.
  • You need to ensure you dispense the optimum amount of adhesive every time. But too much adhesive can cause blooming or uncured adhesive.
We offer a full range of dispensing solutions from Fisnar to help you get the best results from your cyanoacrylate adhesive.
Just reply to this email and we can discuss how ECT adhesives can help you.

ECT Adhesives – The Power to Imagine a better manufacturing future.
Tagged under: , , ,

What you can read next

Power Adhesives Spraytec adhesives foam bonding image - ECT Adhesives
The Power to Imagine series – A sprayable hotmelt adhesive in easy to use slugs
Hot Melt Glue sticks and Glue Guns from Power Adhesives.
New Hot Melt Potting Compounds